Make: Detroit
Engine: DD15 GHG17 (2017 & Newer)
PID: N/A
SPN: 2000
FMI: 9
Description: Communication Loss with a Common Powertrain Controller (CPC) Module (CPC
heartbeat message is no longer arriving)
Troubleshooting:
DESCRIPTION:
CPC module has lost communication.
MONITORED PARAMETER:
CAN communication
TYPICAL ENABLING CONDITIONS:
None
MONITOR SEQUENCE:
None
EXECUTION FREQUENCEY:
None
TYPCIAL DURATION:
None
DASH LAMPS:
None
ENGINE REACTION:
1. MIL
2. CEL
VERIFICATION:
Limp mode, shut-down condition.
POSSIBLE CAUSES:
1. Battery voltage
2. Faulty wiring
3. Faulty CPC
4. Faulty MCM
Make: Detroit
Engine: DD15 GHG17 (2017 & Newer)
PID: N/A
SPN: 2003
FMI: 9
Description: J1939 Message is Missing from Source Address 3 (dec)
Troubleshooting:
DESCRIPTION:
J1939 signal missing.
MONITORED PARAMETER:
This code sets when the J1939 message is not received.
TYPICAL ENABLING CONDITIONS:
Always enabled
MONITOR SEQUENCE:
None
EXECUTION FREQUENCEY:
Always enabled
TYPCIAL DURATION:
Two seconds
DASH LAMPS:
CEL
ENGINE REACTION:
None
VERIFICATION:
Key ON, engine OFF.
POSSIBLE CAUSES:
1. Faulty Controller Area Network (CAN) line.
2. CPC needs reprogramming.
3. CPC needs proper configuration.
Make: Detroit
Engine: DD15 GHG17 (2017 & Newer)
PID: N/A
SPN: 2011
FMI: 9
Description: J1939 Message is Missing from Source Address 11 (dec)
Troubleshooting:
DESCRIPTION:
J1939 Message is missing from source address 11 (dec).
MONITORED PARAMETER:
CAN communication
TYPICAL ENABLING CONDITIONS:
Always enabled
MONITOR SEQUENCE:
None
EXECUTION FREQUENCEY:
Always enabled
TYPCIAL DURATION:
2 seconds
DASH LAMPS:
None
ENGINE REACTION:
None
VERIFICATION:
Ignition cycle
POSSIBLE CAUSES:
1. Battery voltage.
2. Faulty Controller Area Network (CAN) line.
3. CPC needs reprogramming.
4. CPC needs proper configuration.
Make: Detroit
Engine: DD15 GHG17 (2017 & Newer)
PID: N/A
SPN: 2017
FMI: 9
Description: J1939 Message is Missing from Source Address 17 (dec)
Troubleshooting:
DESCRIPTION:
J1939 Message is missing from source address 17 (dec).
MONITORED PARAMETER:
CAN communication
TYPICAL ENABLING CONDITIONS:
Always enabled
MONITOR SEQUENCE:
None
EXECUTION FREQUENCEY:
Always enabled
TYPCIAL DURATION:
Two seconds
DASH LAMPS:
None
ENGINE REACTION:
None
VERIFICATION:
Ignition cycle
POSSIBLE CAUSES:
1. Battery voltage.
2. Faulty Controller Area Network (CAN) line.
3. CPC needs reprogramming.
4. CPC needs proper configuration.