Make: International
Engine: MaxxForce DT (2010 & Newer)
PID: N/A
SPN: 654
FMI: 7

Description: Injector 4 Spool Motion Compensation Max Authority Reached
Troubleshooting:
The Electronic Control Module (ECM) determines when fuel needs to be supplied to injectors
and supplies voltage to the injectors. The voltage causes a needle inside the injector to lift
which uncovers the spray holes, directing fuel into the cylinder.
Probable causes:
1) Individual injector spool motion compensation exceeding maximum threshold
2) Mismatched Engine Control Module (ECM) programming

Make: International
Engine: MaxxForce DT (2010 & Newer)
PID: N/A
SPN: 654
FMI: 14

Description: Injector 4 Fuel quantity/timing error
Troubleshooting:
The Electronic Control Module (ECM) determines when fuel needs to be supplied to injectors
and supplies voltage to the injectors. The voltage causes a needle inside the injector to lift
which uncovers the spray holes, directing fuel into the cylinder.
Probable causes:
1) Injector fuel or timing deviation
2) Spool to control valve body static leakage
3) Puck leakage
4) Backup ring and / or O-ring leakage at injector inlet
5) Injector damage
6) Biased Injection Control Pressure (ICP) sensor
7) Injector variability
8) Engine oil worn out
9) Compression loss
10) Bent connecting rod
11) Aerated oil
12) Exhaust Gas Temperature (EGT) sensor drift (biased sensor)

Make: International
Engine: MaxxForce DT (2010 & Newer)
PID: N/A
SPN: 655
FMI: 4

Description: Injector 5 open coil – short circuit
Troubleshooting:
The Electronic Control Module (ECM) determines when fuel needs to be supplied to injectors
and supplies voltage to the injectors. The voltage causes a needle inside the injector to lift
which uncovers the spray holes, directing fuel into the cylinder.
Probable causes:
Injector 5 open coil circuit short to GND
Injector 5 open coil circuit OPEN

Make: International
Engine: MaxxForce DT (2010 & Newer)
PID: N/A
SPN: 655
FMI: 5

Description: Injector 5 open coil – open circuit
Troubleshooting:
The Electronic Control Module (ECM) determines when fuel needs to be supplied to injectors
and supplies voltage to the injectors. The voltage causes a needle inside the injector to lift
which uncovers the spray holes, directing fuel into the cylinder.
Probable causes:
Injector (5) open coil circuit short to GND
Injector (5) open coil circuit OPEN